What is GSM? When it comes to Android devices, especially for us here in the U.S., there are two major differentiators that really have nothing to do with Android and everything to do with the carrier you plan on using the device on. When you're talking about a mobile device, you're either talking about a GSM device, or a CDMA device. GSM stands for Global System for Mobile Communications and is the network standard for much of the world.
Of the four major carriers here in the United States, T-Mobile and AT&T use GSM technology. In Europe, you'll be hard-pressed to find something other than GSM. In Asia, you'll still find some CDMA carriers.
A major advantage, at least from an end-user perspective, of GSM is the ability to easily swap devices, thanks to the SIM card. That's the little card (like what you see in the picture above) that contains are information that allows you to connect to a network, and it also can contain contact information. Pop the card into a new phone, and your phone number and contacts come with you.
There are a couple caveats to that, of course. One is that the phone you're using has to have radios to work on specific frequencies. While T-Mobile and AT&T are both GSM carriers and share the same EDGE radio frequency, they use different 3G frequencies, and most devices released in the United States can only connect to one or the other. (That's not always the case though -- some phones, like the GSM Galaxy Nexus, have the ability to do both) Another hurdle is that carriers usually "lock" the device to only use their own SIM cards. That is, if you put an AT&T SIM card into a T-Mobile phone, it'll ask for an unlock code. You can purchase the codes online, or the carrier may give it to you for free, if your account is in good standing. Outside the U.S., this is less of an issue because phones often are purchased "unlocked," albeit at higher prices than you'll see here.
But, wait. It gets more confusing. The new 4G LTE is a GSM standard. Therefore, Verizon and (soon) Sprint are using GSM technologies on their otherwise-CDMA phones. And both of those carriers have had "world phones" in the past -- traditional CDMA devices with GSM radios tucked in for use outside the United States.
Is GSM preferred over CDMA? For some, it's just a personal thing. For others, it's a perceived technical thing (such as building penetration). For others, it's a business thing, like being able to more easily use your personal device overseas with a prepaid SIM.
Previously on Android A to Z: What is fastboot?; Find more in the Android Dictionary
More from the Android Dictionary
Posted by Jerry Hildenbrand on 26 Jan 2012 6:20 pm
What is NFC? NFC stands for Near-Field Communication and is a set of standards (established in 2004) for small, portable devices to establish radio communications with each other. Devices need to be close, usually no more than a few centimeters apart (and often they need to touch), which is why it's a Near-Field way to communicate. The standards cover data exchange formats defined by the NFC...
Posted by Phil Nickinson on 25 Jan 2012 12:50 pm
What is Mobile World Congress? The next big mobile trade show on our Android schedule is Mobile World Congress -- or MWC, for those in the know. It's in Barcelona, Spain, and has been since 2006 (and will be through 2018). Before that, it was known as 3GSM World and was in Cannes, France. This year will be the last at the Fira de Barcelona, a beautiful venue that actually allows for some...
Posted by Jerry Hildenbrand on 23 Jan 2012 12:58 pm
What is a kernel? If you spend any time reading Android forums, blogs, how-to posts or online discussion you'll soon hear people talking about the kernel. A kernel isn't something unique to Android -- iOS and MacOS have one, Windows has one, BlackBerry's QNX has one, in fact all high level operating systems have one. The one we're interested in is Linux, as it's the one Android uses. Let's...
Posted by Jerry Hildenbrand on 20 Jan 2012 3:42 pm
What is the JIT? JIT stands for "Just In Time," and we use it to describe a Dalvik JIT compiler, which was added to Android with the 2.2 release. It compiles bytecode into native machine code at runtime. Essentially it takes the code for an app, analyzes it and converts it into something that runs faster. It does all this while the application is running, and that's where the "just in time"...
Posted by Phil Nickinson on 19 Jan 2012 1:07 pm
What is an IPS display? IPS stands for In-Plane Switching. It's commonly found in high-end monitors -- gaining mainstream notoriety in Apple's displays -- and has also found its way into tablets. The iPad uses IPS displays. ASUS has an IPS display in its Transformer Prime tablet. And Samsung has its own flavor of IPS in the Galaxy Tab 10.1, which is it calls Super PLS (Plane-Line Switching).
Posted by Jerry Hildenbrand on 18 Jan 2012 11:55 am
Hacking. It means a lot of different things to different people, and to the public at large it conjures up imagery of evil people in exotic places. When we talk about hacking here at Android Central, we usually mean it in its original sense -- tearing into software (or hardware) and changing things until they fit our liking. That's the good kind, and what we're going to talk about now....
Posted by Jerry Hildenbrand on 16 Jan 2012 12:05 pm
What is fastboot? In Android, fastboot is a special diagnostic and engineering protocol that you can boot your Android device into. While in fastboot, you can modify the file system images from a computer over a USB connection. It's a powerful, nerdy tool that deserves to be broken down into terms we all can understand -- let's try and do that.
Not all phones have a fastboot mode that the user...
Posted by Phil Nickinson on 6 Jan 2012 11:48 am
What's an ETF? An early termination fee is something you agree to, albeit grudgingly, when you sign a contract with a carrier. In return for, say, Verizon, selling you a phone for $199 instead of the "full" $499 off-contract price, you agree that you'll stay with that carrier for a given amount of time. In the U.S., that's usually two years. (In Canada, it could be an excruciating three years.)...
Posted by Jerry Hildenbrand on 5 Jan 2012 10:16 am
What is Dalvik? We hear that word getting thrown around a lot on the Internet when talking about Android and its inner workings. While there's no easy explanation we can give in just a few paragraphs, we can cover the basics and point you in the right direction if you need to feed your nerdly side. In its simplest terms, Dalvik is a virtual machine that runs applications and code written in...
Posted by Phil Nickinson on 4 Jan 2012 11:00 am
What is CES? In just a few short days we'll be back yet again in Las Vegas for the 2012 International CES. That's Consumer Electronics Show, if you don't know, and it's the largest gathering of nerds west of the Mississippi. Or east of the Mississippi. Or anywhere near Mississippi.
CES isn't just a mobile show, though. It's everything electronics. And while that means you don't get quite as...
Posted by Phil Nickinson on 3 Jan 2012 3:19 pm
What is a bootloader? At its most basic level, your Android smartphone is like a hard drive, made of up several partitions. One of those partitions holds the Android system files, another holds all the app data you accumulate (which is how you're usually able to update without losing all your stuff), and others to do more behind-the scenes stuff.
Think of the bootloader as a security checkpoint...
Posted by Phil Nickinson on 2 Jan 2012 5:50 pm
Definitions for commonly used Android terms
Posted by Phil Nickinson on 2 Jan 2012 5:30 pm
Welcome to our our latest feature here at Android Central. This one's geared more for you folks who are just getting started with Android, but it's a great refresher for you veterans as well.
Tucked away at AndroidCentral.com/dictionary is -- you guessed it -- a glossary full of Android-type terms that we use every day. Don't know what we're talking about? Chances are a quick look with explain...