Android A to Z: What's an IPS display?

By Phil Nickinson  | Jan 19 2012 | 2:07 pm  | 12 Comments

Android A to Z - What is IPS?

What is an IPS display? IPS stands for In-Plane Switching. It's commonly found in high-end monitors -- gaining mainstream notoriety in Apple's displays -- and has also found its way into tablets. The iPad uses IPS displays. ASUS has an IPS display in its Transformer Prime tablet. And Samsung has its own flavor of IPS in the Galaxy Tab 10.1, which is it calls Super PLS (Plane-Line Switching).

The long and short of it is that you get better color representation -- that is, whites are white, blacks and back, reds are red, etc. -- and better viewing angles. That's perhaps less of an issue with tablets than larger displays, because you're more likely to be using it directly in front of your face. But wider viewing angles are always better than not. (And we've seen some pretty horrid tablet displays in our day.)

There's not a lot of arguing against that, technically speaking, an IPS display is just "better" than a non-IPS display. If you have the option between an IPS or non-IPS display, we'd go with the former.

Previously on Android A to Z: H is for Hacking; Find more in the Android Dictionary

More from the Android Dictionary

Android A to Z: Sideloading
Article

What is sideloading? [Android A to Z]
by Jerry Hildenbrand
Feb 02, 2012
What is sideloading?  It's a term you see a lot thrown around while talking about Android applications, and it's simple to explain.  It means installing applications without using ...
Android A to Z - Recovery
Article

What is recovery? [Android A to Z]
by Jerry Hildenbrand
Feb 01, 2012
What is recovery?  In Android, recovery refers to the dedicated, bootable partition that has the recovery console installed.  A combination of key presses (or instructions from a command l...
What is a QR Code?
Article

Android A to Z: What is a QR code?
by Phil Nickinson
Jan 31, 2012
What is a QR code? These things are everywhere nowadays. Little square barcode-looking things. They're on website, they're on pictures, they're on advertisements -- they're everywher...
PRL update
Article

What is a PRL? [Android A to Z]
by Jerry Hildenbrand
Jan 30, 2012
What is a PRL?  PRL stands for Preferred Roaming List and is a database used in CDMA (think Sprint and Verizon here) phones.  It's built and provided by your carrier, and used when you...
open source
Article

What is open source? [Android A to Z]
by Jerry Hildenbrand
Jan 27, 2012
What is open source? Open-source software is software that makes the source code freely available, for anyone to see and use. There are different open-source licenses that have different use conditi...

Phil Nickinson

Phil Nickinson Editor in Chief

"Phil is a recovering print journalist, editor of Android Central, subtitles and street signs."

5041(articles)

3328(forum posts)
 
There are 12 comments

bdfull3r says:

IPS or Super AMOLED+

reidoreilly says:

well i know my transformer display looks much better to me when i compare it to my gnex. So ips > amoled

jwood55812 says:

He said Super AMOLED+, not Super AMOLED HD

Unibrow says:

The Fire has an IPS display and it's quite nice although I think I still prefer my sgs2 display. The IPS screen def has better color representation though when it comes to whites, there is no question there at all.

ScottJ says:

IPS has inferior refresh rates compared to TN. Other than that, it's superior in all other ways.

bigcatman says:

Typo: "blacks and back" should be "blacks are black".

icebike says:

I'm not convinced we have learned much when the only thing explained is what the letters stand for.

Far more informative information is provided by two Wiki articles that explain the competing technologies.

LCD Technologies: http://en.wikipedia.org/wiki/Liquid_crystal_display#Active_matrix_techno...

http://en.wikipedia.org/wiki/TFT_LCD#Types

The best visual explanation is this image from PCTechGuide.com in which you see the top yellow line (representing electrodes) positioned between the viewer and the light source typical of older technologies. Looking thru that layer of electrodes is what messed up viewing angles.

The IPS method of putting those electrodes beside the liquid crystals moves these electrodes out of the way, by putting them on the same PLANE (surface) as the crystals.

TFT vs IPS

tronthedon says:

Apparently, you missed the point. This is not Anandtech.

http://en.wikipedia.org/wiki/Layperson

fechhelm says:

So when is ASUS and Samsung going to be sued for using the same display as Apple.

hmmm says:

IPS has image retention, lots of stuck/dead pixel issues, screen bleed and other quality control issues. Some may be device specific but I have seen a lot of complaints about them on iPads as well as the TF Prime. If you get a good one they are nice but you may need to return one or two devices to get a good one.

borgdog says:

How about contrast? IPS having a full backlight like all LCD displays means that even black is emitting some light. Like when I read on my iPad2 in night mode the whole screen is giving off light, while if I understand right amoled is pixel based light emission so I wouldn't get the whole screen glow, which to me would mean darker black, and less annoyance and eye strain. I would think there are different times where each would be better. Being somewhat colorblind person, having true color representation doesn't matter that much to me, I can't see it. Not having whole screen glow when reading in the dark does matter... makes me wonder why I have an iPad, although I rarely read on it.